#
# ----- description
#

' domtimed.conf - config file for Domain Time II daemon.  This file
' must be named /etc/domtimed.conf to be recognized by the daemon.

' daemon may be started from your rc files, or run (with root privs)
' on demand.  The daemon will continue running in the background
' until reboot or until killed manually.

' Values are read on startup.  Use kill -HUP to reload while the
' daemon is running.

' Blank lines and lines beginning with #, ; or ' are ignored.  Format
' for valid lines is keyword=value.  Comments may be added after any
' value by putting one or more spaces between the value and the comment

#
# ----- logging
#

' LogFileName is the name of our output file
' LogSize is the max size (in KB) for the log file
' LogLevel range is 0 to 4
'    0 = no log
'    1 = errors only
'    2 = errors and warnings only
'    3 = errors, warnings, and info
'    4 = debug

LogFile  = /var/log/domtimed.log	' name of log file
LogSize  = 64				' zero means no limit
LogLevel = 3				' loglevel

#
# ----- clock management
#

' If ManageClock is FALSE, the daemon will assume that some other
' process (xntp or similar) is taking care of clock corrections, so
' the daemon will NOT check or correct the clock, and will ignore
' the rest of the settings in this file.

' If ManageClock is TRUE, the daemon will use the settings in this
' file to check and correct this machine's clock.

' If ManageClock is TRUE, and TestMode is also TRUE, then the daemon
' will go through all the motions of managing the clock, but never
' actually change the time.  If TestMode is FALSE, then the daemon
' will change the system time as necessary.

ManageClock = True
TestMode    = False

#
# ----- auto discovery
#

AutoConfig         = True	' try to find a server
UseDHCP            = False	' check DHCP 042 and 004 for servers
AutoConfigFallback = True	' if discovery fails, use listed servers

#
# ----- DT2 compatibility
#

RespondToDTCheck       = True	' respond to DTCheck queries
IgnoreCascadeTriggers  = False	' don't sync on master/slave cascades
IgnoreAdvisoryTriggers = False	' don't sync on slave advisory triggers
HonorPulse             = True	' sync when DT2 heartbeat pulse seen

#
# ----- clock control
#

' MaxDisparity is always ignored on first timeset after startup, and
' when a directed sync signal is received (i.e., from DT Manager or
' DTCheck).  Otherwise MaxDisparity controls the maximum variance that
' will be corrected when domtimed checks the time on its own intiative.
' Setting MaxDisparity to zero means always accept any amount of
' correction.

' If AutoSchedule is TRUE, the SuccessInterval setting is taken as
' the maximum time to wait before checking again, and FailureInterval
' is taken as the minimum time.  AutoSchedule will pick a delay time
' between these two values appropriate to minimizing the amount of
' future corrections.

' If AutoSchedule is FALSE, the SuccessInterval and FailureInterval
' settings will be used as given.

' All settings are in seconds, except MinDisparity and MaxSlew, which
' are given in milliseconds.

' NOTE:  Most Linux machines cannot slew greater than half a second
' (500 milliseconds) reliably.  Solaris machines always set to the
' nearest second first, then slew up to half a second for the
' final correction.  Slewing can take a LONG time if the correction
' is greater than a quarter second or so.  Do not set the MaxSlew
' value above 250 without a really good reason, and do not set it
' above 499 unless you know your system can handle a slew that big. 

MaxDisparity    = 3600		' ignore corrections larger than this
MinDisparity    = 1		' ignore corrections smaller than this
MaxSlew         = 125		' slew if change is this amount or less
SuccessInterval = 7200		' if got the time, check again this often
FailureInterval = 60		' if couldn't get time, check again in
AutoSchedule    = True		' calculate SuccessInterval as necessary

#
# ----- servers to use
#

' These servers are used only if AutoConfig (see above) is FALSE, or
' if AutoConfig AND AutoConfigFallback are TRUE and auto-discovery
' could not find any servers to use.  Specify up to eight servers,
' in the form serverx=servername,protocol, where x is the number of
' the server (1 to 8), servername is the DNS name or IP number of a
' time server, and protocol is one of the following:
'
'    NTP        -- RFC 1769 NTP/SNTP protocol
'    DT2        -- Domain Time II protocol
'    TIME-UDP   -- RFC 868 using UDP
'    TIME-TCP   -- RFC 868 using TCP
'
' Servers will be used in the order listed, stopping after the first
' one that responds with a valid time.  Do not put any spaces or tabs
' around the comma separating the server name from the protocol!

Server1 = time.nist.gov,NTP
Server2 = clepsydra.dec.com,NTP
Server3 = tick.greyware.com,DT2
Server4 = tick.greyware.com,NTP
Server5 = tock.greyware.com,DT2
Server6 = tock.greyware.com,NTP
Server7 = 
Server8 =

#
# ----- end of domtimed.conf file
#